ERROR -- Can't find library

圣光之血

請大俠解答，我在做Pspise仿真時出現ERROR -- Can't find library
.lib "nom.lib" ，是不是我改了三極管的參數的原因，要怎么改正，謝謝！

F1F2F3

求樓主給我發一下這個軟件吧1606095806@qq.com，，要是可以的話真的是太感謝了

我應該

**** RESUMING freq.cir ****
.END
ERROR(ORPSIM-15108): Subcircuit uPC4560 used by X_U3A is undefined
ERROR(ORPSIM-15108): Subcircuit uPC4560 used by X_U3B is undefined
ERROR(ORPSIM-15108): Subcircuit uPC4560 used by X_U4A is undefined

我的軟件安裝完使用也出現了問題,請問下怎么解決?
我的元件是在OPAMP.LIB里面的,我有進入到MIND.LIB里面但是我不確定內容是否正確,以下是內容:
* Sample standard device library
*
*  Copyright Cadence Design Systems, Inc. 2000 All Rights Reserved.
* This is a reduced version of PSpice A/D's standard parts libraries. Some
* components from several types of component libraries have been included
* here.  You are welcome to make as many copies of it as you find convenient.
*
* $Revision:   1.6  $
* $Author:   HIRASUNA  $
* $Date:   11 May 2000 09:36:36  $
*
* ---------------------------------------------------------------------------
*
* The model library included with the production version of PSpice A/D
* includes over 14,000 analog devices, and over 1,800 digital devices.
*
*
* It takes time for PSpice to scan a library file.  To speed this up, PSpice
* creates an index file, called <filename>.IND. The index file is re-created
* whenever PSpice senses that the library file has changed.
*
.lib "breakout.lib"             ; generic devices for schematic capture
* "regular" device libraries
.lib "eval.lib"                 ; reduced version of PSpice A/D's standard
                                ; parts libraries. Some components from
                                ; each of several types of component
                                ; libraries have been included here.
.lib "evalp.lib"                ; sample version of PSpice parameterized
                                ; parts libraries.
.lib "templates.lib"            ; dummy template library
.lib "evalAA.lib"  ; Adv Analysis Parts.
* end of library file

天字：一：號

不懂，怎么解決？

zeng119

你在仿真工具欄中點擊 Edit Sim..Profile ,選擇那個Configuration file ，下面那個Library 中看看那個 nom.lib文件的位置是否正確，如果不正確從新找到那個文件，位置不用我說了吧，添加為Global、、、、、如果還提示某些庫文件找不到的話，那就在 tools/pspice/library中，，用記事本打開那個nom.lib，看看里面的意思和格式，，看你用的庫文件的有沒有包含進去

MC夜雨冷風

我遇到同樣的問題了，前輩，有方法了嗎？